Special Bucket Teeth for Pure and Supplementary Mine of Kobelco，While improving the strength，Also increases the length，It has two characteristics of wear resistance and durability.。It can meet the harsh working conditions of the mine.，Help you conquer the mine easily！

01

Little bucket teeth

Various advanced industrial manufacturing technologies have been condensed.

Bucket tooth is an important part of excavator.，Resembling human teeth.，It needs to be strong and wear-resistant，Be able to withstand long-term test。

The bucket tooth is connected with the bucket tooth holder by a lock pin，Due to the wear of bucket teeth, the failure part is the tooth tip.，So when it needs to be replaced,，Replace the bucket teeth only。

  

According to the use characteristics of the bucket teeth,

Use characteristics

Bucket teeth must have high wear resistance，Only in this way can the service life of the bucket teeth be effectively prolonged.。At the same time，Bucket teeth also need strong toughness.，Capable of withstanding high-intensity impact，Not easy to break。In addition，Because the amount of bucket teeth is very large.，So，It must also have good economy.，Only in this way can we reduce the cost of our use.。It can be said，Little bucket teeth，Condensed our various advanced industrial manufacturing technologies。

At present, the bucket teeth of excavators can be divided into the following categories

classification

01

 Rock teeth

Used in iron ore，Quarry, etc

02

 Earth Square Tooth

For earthwork，Sandstone, etc

03

 Conical teeth （Also known as：Tiger claws and teeth）

Used in coal mines

02

How to replace a set of wear-resistant and durable bucket teeth

Passed the above introduction，It is not difficult to find that bucket teeth play a vital role in the process of excavator work.。Therefore, in the daily maintenance of excavators,，We might as well spend 2 minutes every day.，Do a check for the bucket teeth, too.。

When the tip of the bucket tooth is worn seriously，When the excavator is excavating，The force required for the bucket to cut in must be greatly increased，While producing higher fuel consumption，It will also affect work efficiency.。Therefore, it is found that the bucket teeth are seriously worn.，It is very necessary to replace new bucket teeth in time.。

Let's take a look.

How to correctly replace the bucket teeth for the excavator

*Warm tips：Please be thereWIFIWatch this video in case！

03

Characteristics of special tooth for mine of Kobelco

● Strict selection of raw materials，Less harmful impurities

● Exquisite casting technology，The quality is guaranteed

● Structure proportion optimization，Strong penetration，More durable

● Material improvement，Wear-resistant and not easy to break

After investigating the customer's needs，Deep cooperation between Kobelco and well-known manufacturers，The special bucket tooth for pure resupply mine, which is more suitable for market conditions, has been developed.（Casting type）。Not only the strength of the bucket teeth is increased,，The length of the bucket teeth is also lengthened，Both wear resistance and durability，To meet the rigors of mining operations。

Stronger

More durable

Brand new pure tonic bucket tooth，Now generally available，Consult your local dealer。

*Other types of bucket teeth are under development，The follow-up will be launched one after another。