SOILMEC

SA-40

 

 

Product introduction

 

SA40 rotary drilling rigIs a product used forFoundation constructionAndMounted on a new type of heavy crawler craneRotary excavation model。

 

 

Product features

 

Draw the key points

01

Will SC-120 HD Crawler craneAndHydraulic rotary power unit SA-40（Largest model supplied by Geomechanics）Form innovativePile foundation equipment，To emphasize the large diameter drilling and piling capability of the crane.，And provide better performance and efficiency。

Draw the key points

02

SA40Rotary drilling rigs are being integrated. CAT C18Engine、UseClosed circuit pumpAnd developed advanced DMSControl SystemAfter that，The performance of the new crane is better than the previous model.。

Draw the key points

03

Although the purpose of this rig is toHeavy duty typeTo make its structural members moreStable，But its single piece transportation weightBelow48 tons，The transport width is only3.5 meters。

Draw the key points

04

SC-120 HD Diaphragm wall grapples can also be configured、Bushing Oscillator、Dynamic compaction、Functional components such as impact and grab。

 

SA-40

Swipe left to see more

 

Technical parameters

 

 

Maximum torque	kNm	413
Maximum depth	m	94
Maximum diameter	mm	4000
Minimum lifting capacity	t	90

 

 

 

SOILMEC

STM-20

Full hydraulic drilling rig

 

 

 

 

Product introduction

 

STM-20The fully hydraulic drilling rig is mounted on a standard heavy truck chassisVehicle-mounted rotary drilling rig；It is fast、High yield, easy operation and the like.。Due to its power、Reliability and novel configuration，STM-20Satisfied. YesHigh productivity、Easy to transferDrilling requirements，Rotary Dry-hole Piles for Slurry or Stratum Stabilization。

 

 

Picture display

 

STM-20

Swipe left to see more

 

 

Technical parameters

 

Maximum torque	kNm	85
Weight of complete machine	t	20
Engine power	kW	119
Maximum depth	m	30
Maximum diameter	mm	1100/1800
LDP - Large diameter rotary drilling and grouting mode
Maximum diameter	mm	1100/1800
Maximum depth	m	30

 

 

SOILMEC

STM-30

Full hydraulic drilling rig

 

 

 

 

Product introduction

 

CompareSTM-20，STM-30The fully hydraulic drill is mounted on a standard heavy-duty 6.×4 On the truck chassis。Due to its power、Reliability and new configuration，STM-30Satisfied. YesHigh performanceAndEasy to moveDrilling requirements，Dry hole pile applied to slurry or stratum stabilization。

 

 

Picture display

 

STM-30

Swipe left to see more

 

 

Technical parameters

 

Maximum torque	kNm	130
Weight of complete machine	t	29
Engine power	kW	164
Maximum depth	m	55
Maximum diameter	mm	1500/2200
LDP - Large diameter rotary drilling and grouting mode
Maximum diameter	mm	1500/2200
Maximum depth	m	55