Inspection vehicle for resumption of work
The epidemic is gradually under control, do a good job of protection;
The vehicle USES the physical examination first, sharpens the knife not to cut the wood by mistake.

With each big enterprise land one after another resume work, the equipment that has been stagnant for a long time also runs up gradually, and our special vehicle is not general, after having not been used for a long time, must check carefully one time, sorted out below the check item of a few agitator car and powdery can car, quick see your love car whether have these circumstance.

mixer

In order to ensure the normal operation of the hydraulic system, it is suggested to rotate the tank at a low speed before loading materials back to work to ensure the lubrication and protection of the hydraulic system, reduction gear and tugboat oil. At the same time, the following inspections are suggested:

01
Check the storage capacity of hydraulic oil (observed through radiator oil window)

02
Check whether the radiator fan can be turned on manually

03
Check whether the lubricating oil of the reducer is leaking

04
Check whether there is leakage of hydraulic oil in the hydraulic system and whether there is leakage in each joint part

05
Check the connection fasteners for looseness

06
Check whether the reducer, hydraulic pump and hydraulic motor have abnormal sound

07
Check start the engine, control the servo handle to make the drum turn forward at low speed, and observe whether the hydraulic system works normally

08
Check the gap between the reducer and the tank to see if there is any entangling foreign body

09
Check vehicle license plate for occlusion or deface

powder tanker

In order to ensure the stable and safe operation of vehicles, it is recommended to pay special attention to the following points in the first operation when the operation resumes:

01
Check the surface of the fluidized bed for hardening or damage of damp material

02
Check oil of air compressor and diesel engine (through oil window or oil scale)

03
Check whether the tank cover is intact

04
Check whether the running system is normal (such as whether the wheelbase is off-track, whether all fastening bolts are loose, whether the plate spring limit pin is complete, whether the tire surface and tire pressure are normal, whether the suspension is abnormal wear, etc.)

05
Check whether the traction pin fastening bolt is loose

06
Check whether the vehicle brake is sensitive and reliable

07
Check whether the circuit of vehicle lamps is normal

08
Check whether the pressure gauge is normal

09
Pay attention to safety valve and check valve working normally

10
Care whether the butterfly valve can be opened and closed normally

11
Pay attention to the air tightness of inlet, auxiliary blowing pipe and ash pipe

& have spent