Recently, the joint prevention and control mechanism of the state council issued the "guidance on scientific prevention and control and precise measures for the prevention and control of new coronary pneumonia in different regions and at different levels", which requires: implementation in low-risk areas; External defense input ” Strategy to restore the normal production and life order. Middle risk areas, to implement the ldquo; External and internal non-proliferation ” Strategy, as soon as possible to restore the orderly order of normal production and life. High risk areas should be implemented. Internal non-proliferation, external non-proliferation output, strict control ” Strategy, according to the situation of the epidemic situation to gradually restore the order of production and life.

At the same time that the national level has issued requirements for prevention and control by regions and levels, local governments are also actively promoting the resumption of production. In some regions, enterprises no longer need to go through the examination and approval procedures to resume work, but change to the reporting system. According to the CCTV news report, recently, a number of production enterprises across the country have entered the resumption of time, many key projects are also in full gear to resume production. It can be seen that under the guidance of relevant national policies, all localities are actively preparing for the resumption of relevant work. We believe that in the near future, the epidemic will be fully contained and people's work and life will return to normal. A year's plan is in the spring, in this crucial moment of the coming resumption of work, wittgen China is also actively contributing its own strength.

Positive signal: some areas have resumed work, and the post-holiday hoist has been started
According to xiao wei, in the low-risk areas of the epidemic, some engineering projects have begun to resume or are actively preparing for resumption. For example, work on some municipal maintenance projects in zhejiang province began to resume last week. In response to customer demand, the local agent has arranged the delivery of the first batch of multiple equipment. We believe that in response to the call of the state, sand and gravel aggregate supply emergency supplies, the site will be started one after another. The severe winter has come to an end, spring is coming, small dimensional remind dimensional powder people, ask everybody not to forget to be ready to resume work in time.

Hand in wonderful moments atlas

As the outbreak dies down, more and more people are preparing to return to work. Before the resumption of work, please do not forget to do a good job in the equipment before the start of the inspection work ~ in order to let you fans of the equipment to maintain a good state, full speed to the site line, little vitti consulted vitgen China's senior service experts, to bring you a necessary equipment inspection guide before the start of work.

Guide for starting inspection of equipment
Engine part
The engine is the heart of the equipment, is the source of the power of the equipment, need to pay special attention

Check antifreeze, oil level and pipeline state

Check diesel oil tank and pipeline to prevent sediment blockage

Change the engine oil to the standard

Check generator and pump belts

Tips: it is recommended to change antifreeze and oil after a long time of parking, so as to avoid unnecessary wear and tear on related parts.

For more information, please refer to the manual or engine manufacturer information.

Mechanical part

The mechanical part is the skeleton of the equipment, the importance of the equipment is self-evident, but the mechanical part is also the equipment maintenance process of the workload is relatively large part, we must carefully do the maintenance of each module, to avoid omission.

Lubrication and maintenance of mechanical hinge points and bearings should be done well before starting construction

Check the gear oil oil level

Check the integrity of the dust jacket of each mechanical part and replace the damaged seal

in time.

The metal contact surface exposed to air should be cleaned

Check the wear and tensioning of machine tracks and belts

Check the wear degree of tire, steel wheel, milling drum, ironing plate and other components

Tips: lubrication, dust - proof, rust - proof, anti - stick treatment of the mechanical part of the equipment should be carried out in the correct order.

Hydraulic system

If the mechanical part is the bone of the equipment, then the hydraulic system is the muscle of the equipment. In the work, those precise and smooth, full of a sense of power of the operation are inseparable from it. These inspections are essential before construction begins:
Check the oil level of the hydraulic oil tank and the status of oil pipes and joints
Check the state of each filter element in the hydraulic system
Whether the cylinder rod and other metal components are clean
Tips: hydraulic oil selection and cleanliness of the hydraulic system is very important for the performance of the maintenance.

Electrical system

Electrical system is the nerve of equipment, is an important guarantee of smooth and efficient operation of equipment. We must do the following electrical system starting inspection:
Level check of battery fluid
Is the battery voltage sufficient
Whether the pile head of battery is corroded
Whether the line is broken and whether the joint is firm
Control box, box dustproof, waterproof sealing
Tips: power on to check the performance of the controller to prevent the failure of software program loss in the controller due to long-time parking.

Machine water spraying system
The machine water spraying system also plays a very important role in the working process of equipment. These checks are essential:
Whether the water tank and water filter are clean
State of water pump, pipeline and nozzle
Check and replace anti-corrosion rod
Tips: if the machine is equipped with a high-pressure cleaning pump, please do not forget to check the high-pressure water gun and pipeline system.

Above is the small dimensional summary of the equipment start inspection notes, I hope you can be successful in the New Year, to create a brilliant.

For more detailed information on equipment maintenance and maintenance, please consult the customer service personnel of witgen China's local agents for more specific advice.

Recently, the training department of wittgen China also provided a series of online training courses for fans, including basic courses and customized courses, such as regular courses on equipment operation and maintenance. You can directly contact the local agent to sign up for the online training. As the saying goes, the early bird catches the worm. In order to future glory, please take advantage of the leisure time before resume work to enrich themselves and improve professional skills.

Finally, small d also remind you that the current outbreak has not completely subsided, you fans in work and life still need to do a good job of protection, must not be taken lightly. We wish you all good health and a safe passage through this special time.