Nenzing (Austria), September 2020 – It crosses through southern Germany stretching between the French and the Czech borders. As part of the European Route 50 it is an important link between Paris and Prague: the A6 motorway. The upgrading of the motorway includes the rebuilding of the Neckartal Bridge at Heilbronn between the junctions Untereisesheim and Neckarsulm. Hochtief Infrastructure GmbH installed the foundation piles using the new drilling rig type LB 45 from Liebherr. The name of the new machine comes from its nominal torque of 450 kNm. That is an increase of approximately 10 % in comparison to the already high performance of the LB 36 with 410 kNm.

Challenge

Foundation piles were also required on the “Neckar Island” which lies about 100 m from the riverbank. The drilling rig was transported there by pontoon. Following transportation Hochtief built a pontoon bridge from the pontoon elements so that site traffic could cross. However, the drilling rig was too heavy for the pontoon bridge. After completion of this construction phase, the bridge had to be rebuilt back to a pontoon so that the LB 45 could return across the Neckar. The simple handling of the machine proved to be a huge advantage both when operating it and when facing such logistic challenges.