In recent years, with the rapid development and progress of society,，As a road maintenance department, the maintenance of pavement potholes, cracks and other diseases has been using manual methods.，Not only is it inefficient，And the labor intensity is high，This also reflects the true portrayal of the hard work of the maintenance people.。At the same time, the requirements of social traffic participants for highway traffic are also improving.，Such as：Pavement evenness，Traffic safety and road environment, etc.。So that that maintenance mechanization operation level is improve，It is the inevitable trend of the development of highway maintenance to promote the mechanization of maintenance production, and the general trend of the transformation of mechanization instead of manual work.。

On September 3, 2022, Hubei Yiwei Technology Co., Ltd. delivered a Gail skid loader and carried the world's top.(Italian Simai)Use of self-leveling milling machine in Hubei highway，The introduction of this equipment can greatly reduce the labor intensity of personnel.，And that manpower is save，Work efficiency has stepped up to a new level for the realization of mechanized operation.。The world's top milling machine introduced this time has a self-leveling system.，Integrated with the control system of the whole machine，The operation is intuitive and simple，Realize the milling and planing process of high-standard pit groove step，Compared with the traditional process, it can not only greatly improve the efficiency,，Reduce project operating costs，It can better meet the requirements of high standard construction in technology.。

Milling operation is a common function of pavement maintenance.，It can carry out efficient milling and planing on the damaged pavement.，This time, the self-leveling milling machine with a width of 60 cm is used.（With longitudinal and transverse self-leveling function），Maximum milling depth 17 cm，Due to the use of patented self-leveling technology，It can greatly facilitate the driver to control.，Finger tip setting is only required in the cab，The milling machine is capable of milling to a constant depth，At this time, the parameters of the milling machine are not changed by the position of the skid steer loader，Finally, a high standard pothole profile can be formed.，In addition, the seamless link can also be realized when the second cutter is milled side by side.。

As the standard of road maintenance is getting higher and higher,，The milling machine introduced this time also has the function of step milling.，It is convenient to reserve steps.，Applicable to maintenance requirement of road deep disease，It is convenient for asphalt to be compacted in layers without dead angle，At that same time, the adhesion and waterproof performance of the new and old asphalt are improve.，Greatly improve the stability of the repaired structure and prolong the service life，Reduce the possibility of secondary disease。

Road maintenance improves quality and efficiency，It also needs green environmental protection maintenance.，Because the waste material after milling is in the state of fragmentation，And contains a large amount of usable aggregate，At this time, a small asphalt recycling vehicle is used.，The asphalt recycle hot patch can be obtained on site.，Reduces milling waste disposal and dumping cost，Promoting the utilization of renewable resources，Achieve environmental protection and high efficiency at one stroke。Through the introduction of maintenance equipment for skidding loader，It just forms an application combination with the enterprise's own asphalt recycling machine.，But also realize that complementarity of the maintenance equipment.。

Whether it is the crushed material after milling，Or other gravel contaminated by the road?，Skid Steer Loaders can also replace enclosed sweepers in under a minute.，It is used to quickly clean the road and site.，It has sweeping、The power of collecting and loading three in one，The cleaning efficiency can reach 10000 square meters per hour.，Can replace the efficiency of 50 workers，Really realize the value and convenience of one machine for multiple purposes，It also saves money for construction enterprises to buy special sweepers.。

Other than that，This time, Hubei Yiwei Technology Co., Ltd. has also equipped the enterprise with a standard bucket.，And handle fork attachment，Mechanical value of a bucket versus a dedicated loader，The value of a handling fork relative to a professional forklift，Yiwei Company provides users with mechanized maintenance.，It also gives them the added value of a skid steer loader.，Really save money for construction enterprises，At the same time, the utilization value of the equipment is improved.。