Okai“Classic case”The pattern takes you deep into the scene.，Professional service guarantee，Exclusive technical support，Give it all to you.。

Overview

Industry：Smelting industry

There are five sets of dust removal equipment on site.，The bag replaced this time is the dust collector for zinc smelting.。Jiangsu Aokai technicians went to the scene for technical exchanges.，And give the appropriate product selection。

Pre-sales site survey

Condition of the precipitator（Single set）

Item Purpose	Number According to
Flue gas volume under working condition(m³/h)	30872
Filter the wind speed(m/min)	0.8
Ash removal mode	Online ash removal、Pulse line blowing
Operating temperature（℃）	100-120
Instantaneous operating temperature（℃）	140-160
Oxygen contentO2(%)	＞16
Moisture contentH20(%)	＜10
Sulfur dioxideSO2 (mg/m³)	Alkaline corrosion
Required dust emission concentration （mg/Nm³)	≤10

 

It is found after investigation：Incorrect material selection of the original bag of the dust remover，Cause the filter bag to shrink after the dust remover works，The skeleton cannot be removed。Materials shall be re-selected according to actual working conditions.，Replace the skeleton at the same time。

Okay program

According to the observation of the dust remover on site，Combined with the rich application experience of our company for many years，The technical team of Aokai Company has configured the dust collector for the customer.OkaiPT180MFilter material。

After-sales on-site service

Aokai after-sales technical team provides on-site bag installation guidance and maintenance operation training。At the same time, fluorescent powder detection and on-site pre-coating ash treatment are carried out on the installed dust collector.，Ensure that the dust remover has no leakage point，Prolong the service life of the cloth bag。At presentContinuous tracking of the use of cloth bags。