The cat's shadow is heavy

Bobcat skid steer loader

The basement is busy.

An underground garage in Sichuan，The epoxy floor has been used for more than ten years.，Part of the ground is damaged.，Repair operation is required。

BobcatS770 andS18 Skid Steer Loaders Work Hand in Hand，Undertook this important task.！The Bobcat skid steer loader with the planer is in the underground garage.“Scattered flowers.”，The cutter head rotating at a high speed brings waves.“Smoke”，Leaving only a neat milled surface where it passes.！

Milling effect bar bar drop！

Bobcat Skid Steer Loader carries 60cmNapping operation with wide milling machine。According to the construction requirements，The milling depth shall be controlled at 3~10mm。Bobcat planer hydraulic control sideslip，Able to mill welt at the foot of wall，There is no dead angle in construction。

The base surface of the underground garage milled by the Bobcat skid loader is very rough.，The bonding area between the base material and the leveling layer can be enlarged，To hold them firmly together.。

Two Bobcats working together，Work simultaneously in both directions from the basement，Construction efficiency amazed Party A！

High efficiency and low cost of cleaning

The milling operation is completed.，The overall task is only half completed.，Two devices are used again.Bob-TachFast-changing device for fittings，The closed sweeper was replaced in 2 minutes.。

Sweeping with enclosed sweeper，The milled concrete particles and powder can be easily collected，And that clean efficiency is high，The effect is good。

Enclosed sweeper can work with little or no dust，Reduce the harm of dust to other workers on the construction site。

Calculate an economic account

Milling, napping and cleaning construction of underground garage，The cost per square meter of using Bobcat skid steer loader is only about 1% of labor/30，And that overall efficiency is high、Less time consumption、The cost is low，It smells good with a bobcat.！