The end of the year has come

Many customers and friends are nearing the end of the project.

So let's talk about it next.

Loader Long Term Parking Guide

One、Machine inspection and maintenance

Before long-term parking of loader，The whole body of the machine needs to be checked and maintained.，Remove the contaminated mud from the fuselage，Lubricate all parts of the machine、Repair the damaged parts，Keep the machine in the best condition when it is restarted，Change the engine oil，Fill the fuel tank with diesel.。According to different regions、Different seasons、Select the appropriate oil specification for different ambient temperatures。

Two、 Oil specification selection

Please select the correct oil according to the following specification

 

Three、Fuel specification selection

 

It is necessary to replace the fuel in time according to the temperature change.，Avoid the difficulty of starting the equipment due to the freezing of the oil.，The criteria used are as follows：

1.The temperature is 8°CTo 4CUse 0 when # Fuel oil；

2.The temperature is 4°CTo- 5CUse when -10 # Fuel oil；

3.The temperature is - 5°CTo-14°CUse when - 20 # Fuel oil；

4.The temperature is-14CTo-29CUse when - 35 # Fuel oil；

5.The temperature is - 29CTo- 44COr lower temperatures - 50 # Fuel oil。

Four、Battery maintenance

Battery is easy to lose power in cold environment.，Therefore, it is necessary to remove the battery and store it indoors.，When removing the battery，First, cut the negative wire.，Then cut off the positive wire.，Connect the positive wire before installation.，Then connect the negative wire，In addition, it is necessary to charge the battery in time.，Prevent affecting service life。

Five、Correct parking posture

Withdraw the oil cylinder exposed to the outside.，Prevent the oil cylinder from being corroded or rusted due to collision of foreign objects and wet, rainy and snowy weather.。If space is limited，Cylinder does not fully retract，A coating of grease can be applied to the exposed cylinder rod surfaces，Prevent rust，The parking posture is shown in the figure below.。

Six、The equipment is started periodically

If the equipment is parked for too long，The engine shall be started every half month，And operate the machine，Create a new oil film at the lubrication point of each machine part，Prevent rust，Charge the battery at the same time。

Seven、Safety of equipment

Place each control lever in the neutral position，Pull the handbrake；Check、Empty the cab of valuables.，Prevent items from being lost or stolen；Keep the equipment away from flammable and explosive materials.。

Car Tips

If the vehicle is lost

Use intelligent RevoAPP

It can help to observe the location of the vehicle.

Scan the code to download