Are you still having a headache because of the constant cleaning of the regenerative drying cylinder?？

Are you still unable to raise the discharge temperature?，The thermal efficiency is not high and we are in a hurry.？

Are you still worried about the proportion of regeneration and addition?？

After years of continuous research and development and experiments in the field of asphalt mixing equipment recycling, Deji Machinery，Design and develop a new generation of structural innovation “Self-cleaning”Patent technology of drying drum，Will completely solve your problems.！

On the occasion of the New Year，Deji Machinery before March 31, 2024，We will help you upgrade the regenerative drying cylinder at the most favorable price.！If you are experiencing these problems with your regenerating dryer cartridge，No matter what the brand，What model?，You can contact the Deji personnel you know.，They will help you solve it.！

After April 1, 2024, the upgrade price will be restored to the original price.，Please contact Deji Machinery for detailed consultation on the specific upgrade plan and cost.！

 

According to the calculation, the tail gas of the regeneration drying cylinder is increased by 10℃， Fuel consumption will increase by 1%。See the following table for details
Production temperature 5%Moisture content	Regeneration of flue gas Temperature	Per ton of fuel Consumption	Increase in fuel consumption compared to baseline
140	150	6.18	Benchmark
140	160	6.24	1.0%
140	170	6.30	2.0%
140	180	6.36	3.0%
140	190	6.43	4.0%
140	200	6.49	5.0%

 

High exhaust temperature is assumed，Press 200℃ Calculation ，The extra consumption for producing one ton of recycled materials is 0.31kgFuel oil，Calculate according to 4000 yuan per ton of heavy oil，The cost is about 1.2 yuan。

If the annual production of recycled materials is 100,000 tons，120000 yuan of fuel will be wasted.。At the same time, it increases carbon emissions.，Destroying the environment。

Every ten days and a half months，It takes manpower and financial resources to clean up recycled materials.，Delay the production period，More than the cost of wasted fuel.！

So，A good device for the user，The economy and environmental protection of its operation are particularly important。

The advantages of the patented products launched by Deji Machinery are very obvious.

01

Greatly reduce maintenance costs

Design of self-cleaning module，Cylinder cleaning cycle extended 3-5x，The longest cleaning cycle is only once a year.

02

Discharging at high temperature

The maximum discharge temperature of the regenerated material can reach 170℃，The off-gas temperature can be controlled to be only 10% higher than the discharge temperatures℃Within

03

Structural design innovation

And is more favorable for for a uniform material curtain.，So that that regenerate material is heated more uniformly，And that overall thermal efficiency is improve

04

The addition proportion of the recycled material is large

Ensure that equipment capacity continues to meet requirements

Let's do it right now.，

Early upgrade and early benefit！

 

 

 

The original creator：Wei Wenqing