In the last issue of《Dimensional classroom》In the column，Xiaowei introduced the slipform paver. SP 15(i) Standardize the process of preparation work before construction。And the current period《Dimensional classroom》Will take the fans to learn about the slipform paver. SP 15(i) Installation method and precautions of height sensor and direction sensor。

Wittgen SP 15(i) It is a universal slipform paver.，High-quality slipform paving with a maximum height of 1.3 m All kinds of cement concrete monolithic structures，And a standard width up to 1.8 m Concrete pavement。High mobility and flexibility of equipment，Through high quality machine control system，Integrated highly adaptable electronic steering and control system，Excellent electronic cross slope control system，Ensure high precision concrete slipform paving。Altitude sensors and orientation sensors are the eyes and ears of these control systems.，Proper installation and use can make the equipment perform well in the working process.。

SP 15(i) The sensor mounting interfaces are located on the front and rear legs of the device, respectively。First，We need to find the mounting interfaces of the steering sensor and the height sensor on the left front leg and the right front leg of the equipment respectively.，And determining the installation position of the sensor according to the actual installation position of the equipment mold，Under normal circumstances，We will mount the sensor on the same side of the mold，While the height of the front leg on the other side of the mold，It is normally set to be controlled by the cross slope sensor。

The same，Four sensor mounting interfaces are also arranged longitudinally on the rear leg of the equipment.，Divided into upper and lower groups。In general，We will connect the steering sensor and the height sensor to the lower set of interfaces according to the instructions.；When the turning radius is small，An additional set of sensors needs to be selected and installed on the upper set of interfaces，At the same time, the equipment shall be switched to the mode of small turning radius.。

In fact，The four sensors that come standard with the device are identical。So，How to adjust the sensitivity of the sensor?？What are the precautions in the process of cooperating with the guide line?？Click on the video，Let's learn！